State pages

Solar in Massachusetts

High prices and a mature solar market with program structures that get revised. Worth modeling carefully with the current successor programs rather than old headlines.

Start here in Massachusetts

  • Recorded programme: SMART 3.0 (Solar Massachusetts Renewable Target) (Tariff-based incentive program). Massachusetts announced a redesigned SMART program, SMART 3.0. The Department of Energy Resources filed emergency regulations on June 20, 2025, began accepting applications on October 15, 2025, and opened Program Year 2026 applications in January 2026, per Mass.gov and MassCEC. On May 19, 2026, the Department of Public Utilities approved the revised SMART 3.0 tariff, and on July 8, 2026, it approved the company-specific SMART 3.0 tariffs for Eversource, National Grid and Unitil (Docket 25-175); DOER will begin issuing Final Statements of Qualification. DOER filed final revised regulations for SMART 3.0 on September 11, 2026, under 225 CMR 28.00, and published a draft Program Year 2027 annual report on October 1, 2026, proposing 300 MWAC of capacity for systems subject to the capacity cap, with public comments due November 2, 2026; Program Year 2027 rates and capacity are not final until DOER publishes the final annual report.
  • Recorded programme: Massachusetts net metering (Net metering). Net metering is offered by the state investor-owned utilities, while municipal utilities may offer it voluntarily, per the DSIRE summary for Massachusetts.

Net-metering position: see the recorded programme type and status above, then confirm the export terms that apply at your address in your utility tariff.

Price it for my roof in Massachusetts →

The estimator link carries the Boston planning example for Massachusetts. Change the planning area inside the estimator if another listed metro is closer.

Independent directory, no paid listings

We are not paid by any installer or program listed here. There are no sponsored placements and no affiliate links. This directory is a free tool to help you compare your options.

Production and price context

What that production range means on a roof

Put Massachusetts's range on the standard 8 kW example. At 1,150 to 1,300 kWh per kW per year, the middle band of the 13 states on this site, an 8 kW system produces roughly 9,200 to 10,400 kWh in its first year. The hardware price does not change at the state line: at the DOE Q1 2025 benchmark of $2.95 per watt, that system is $23,600 before incentives in every state. What changes is the value of a kilowatt-hour. At Massachusetts's average residential price, the year-one range is worth about $2,886 to $3,262 if every kilowatt-hour offsets a retail purchase, a simple payback of about 7.2 to 8.2 years with no federal credit and no incentive subtracted. Price does heavy lifting in Massachusetts: at 31.37 cents, even the low end of the production range earns real money against a bill. That strength cuts both ways. It forgives a less-than-perfect roof faster than in a cheap-power state, and it makes oversizing past your own usage the expensive mistake, because surplus energy rarely earns the retail rate.

Massachusetts has used SMART and successor incentive structures plus net metering credits that evolve. So the export credit is the hinge in Massachusetts, and its terms vary by utility and program vintage rather than sitting in one statewide rule. Confirm the credit, rollover, and any cap that applies to a new system at your address before sizing, because a system sized against the wrong export rule gives back the wrong amount every month.

Hold installer promises against that 1,150 to 1,300 kWh per kW range. A promise above the top of it for any Massachusetts roof needs a named production tool, stated tilt and azimuth, and a shade analysis you can reproduce. A promise near the bottom on a clean south-facing roof deserves the same questions in reverse. The state range frames the conversation; the roof-specific model, with your tariff's export value inside it, settles it.

Simple payback on the standard 8 kW example, with every assumption printed

Run your own numbers with your actual bill and quote in the estimator, check how exports are priced in our net metering guide, and read the sizing guide before deciding how much of that 8 kW example your roof should actually carry.

Incentives and export rules to verify

Massachusetts has used SMART and successor incentive structures plus net metering credits that evolve. Values and program names in DSIRE today are the ones to use, not a neighbour's 2021 contract.

DSIRE's Massachusetts listing describes the Renewable Portfolio Standard, with Class I for new renewable facilities (including the former solar carve-out and SREC phases) and Class II for pre-1998 facilities, tracked through the New England Power Pool Generation Information System. The Solar Massachusetts Renewable Target (SMART) Program is listed as a 1,600 MW declining block incentive program that began accepting applications in late November 2018, with incentive levels reduced by a fixed percentage for each 200 MW block split among the utilities. Net metering is offered by the state's investor-owned utilities, while municipal utilities may offer it voluntarily. Confirm current SMART block status, your net metering class, and any state credit entries in DSIRE and your utility tariff.

Policy summary source: DSIRE (Database of State Incentives for Renewables & Efficiency), dsireusa.org, accessed 2026-10-26. Program values are never printed here as guaranteed; name the program, then confirm its current value in DSIRE and your utility tariff.

Two sources decide what applies to your address today: DSIRE, the national database of state incentives for renewables and efficiency, for programs; and your utility's current tariff or residential solar page, for export compensation, fixed charges, and rollover rules. Program names and values change through legislation and rate cases, which is why this page tells you where to verify instead of printing a program value that could be stale on arrival.

Massachusetts in detail: utilities, policy history and program mechanics

High prices, revised programs, no old headlines

Massachusetts systems produce roughly 1,150 to 1,300 kilowatt hours per kilowatt per year in the SolarRoost planning range. The EIA average residential price recorded for Massachusetts is 31.37 cents per kilowatt hour for 2025, well above national averages, which shortens payback even with northern sun. Model with current successor programs, not a neighbor 2021 contract.

Two systems run in parallel. SMART is a production incentive paid through the utility tariff. Net metering is a separate bill credit system with its own classes and caps, offered by investor owned utilities, while municipal utilities may offer it voluntarily, as DSIRE summarizes. MassCEC has partnered with DOER on consumer programs such as Solarize Mass, but SMART qualification runs through DOER, the Administrator, and your distribution company.

SMART and SMART 3.0 through DOER

Mass.gov states that SMART is the Department of Energy Resources incentive program, that regulation 225 CMR 20.00 sets its framework, and that the tariff incentive is paid directly by the utility to the system owner after approval by the Solar Program Administrator and DOER. Mass.gov describes SMART as a 3,200 megawatt declining block program for projects interconnected by Eversource, National Grid, or Unitil, each with blocks that decline in incentive rates, and states that CLEAResult reviews applications and recommends approval to DOER.

DSIRE records the earlier scale still quoted by sellers: 1,600 megawatts, accepting applications in late November 2018, with levels reduced by a fixed percentage for each 200 megawatt block split among the utilities. Mass.gov now warns that some applications may receive a payment rate of $0.00. The successor is dated: Mass.gov states that DOER filed SMART 3.0 emergency regulations on June 20, 2025 under 225 CMR 28.00, after a review beginning in December 2023, and that SMART 3.0 began accepting applications on October 15, 2025. Ask which program, block, and rate a quote assumes.

Net metering classes and caps

Mass.gov glossary states that a Class I net metering facility is 60 kilowatts or less, Class II is more than 60 kilowatts but less than or equal to 1 megawatt, and Class III is more than 1 megawatt but less than or equal to 2 megawatts for a private facility, or 10 megawatts for a public facility. Most homes are Class I, but confirm the class on the application.

Mass.gov defines a cap exempt facility as 10 kilowatts or less on a single phase circuit, or 25 kilowatts or less on a three phase circuit. Mass.gov describes MassACA, the System of Assurance, as the site tracking aggregate net metering capacity and giving host customers assurance before construction that a facility will be eligible once it can generate. Check cap status there.

  • Class I: 60 kilowatts or less, per the Mass.gov glossary.
  • Cap exempt: 10 kilowatts single phase, 25 kilowatts three phase, per Mass.gov.
  • SMART utilities: Eversource, National Grid, and Unitil only.

The portfolio standard underneath

DSIRE records that the Renewable Portfolio Standard was adopted in 2003, that Class I covers new facilities, including those beginning operation after 1997, that Class II covers facilities operating before January 1, 1998, and that certificates are tracked through the New England Power Pool Generation Information System. DSIRE also records a solar carve out supporting over 650 megawatts, with a second phase from April 2014. Rebuild pricing from the SMART 3.0 filing, your class, and your utility tariff.

The order of decisions in Massachusetts

  1. Confirm the export rule and any minimum bill. That prices your surplus energy.
  2. Size the system against a year of bills and the export rule, using our sizing guide.
  3. Price at least three quotes against the $2.95 per watt DOE benchmark line in the estimator.
  4. Only then evaluate batteries, which pay through export value and rate spreads, per our battery guide.

What matters most here

High prices and a mature solar market with program structures that get revised. Worth modeling carefully with the current successor programs rather than old headlines. Start from that fact when you read quotes. Ask every installer to show the production tool behind their estimate, the export value inside their payback, and the incentive owner for every dollar subtracted from the price. If the answers name documents you can check in DSIRE or your tariff, you are having the right conversation. If they name deadlines and pressure instead, our quote red flags guide lists what to ask next.

Worked examples in Massachusetts

This site works the full benchmark example, end to end, for Boston. Each metro page states its production factor, example electricity price, first-year savings, and simple payback on the same 8 kW, $180-bill example used across the site, so the metro figures and this state context can be read together.

Sources and verification

Production ranges are planning factors summarized from National Renewable Energy Laboratory (NREL) PVWatts-style public material, checked October 4, 2026. Cost basis: U.S. Department of Energy Q1 2025 residential benchmark of $2.95 per watt DC (2024 dollars, checked October 30, 2026), used only as a comparison line. Electricity price: U.S. Energy Information Administration, Electric Power Monthly (average price by state), average price by state for 2025: 31.37 cents per kWh, verified 2026-10-26. Incentive and export policy summary: DSIRE (Database of State Incentives for Renewables & Efficiency), dsireusa.org, accessed 2026-10-26. Incentive status must be re-verified in DSIRE at decision time; export rules must be confirmed in your utility tariff. No federal residential credit is assumed; it ended for systems placed in service after 2025. No incentive value is promised on this page.