Solar panel warranty, explained: product vs performance cover
A solar panel carries two warranties that owners routinely merge into one, and the merge is where the misunderstandings start. The product warranty, sometimes called the equipment or materials warranty, covers the panel itself: defects in materials and workmanship, a failed junction box, delamination, a frame that corrodes before its time. The performance warranty covers what the panel does: it guarantees output stays above a stated schedule as the panel ages. One promise is about the object; the other is about the electricity. A panel can fail either promise on its own, and the two promises run for different lengths, are claimed through different routes, and pay different remedies.
The numbers in this guide come from a document read for this page: REC's warranty terms for its Alpha Pure-RX panel, which promise 20 years of product cover and 25 years of performance cover, with at least 92 percent of nameplate power in year 25. Other makers set different terms, and terms vary by model and by market, so every figure here is an example of what a warranty can say, and the certificate for the exact model on your quote is the version that binds the seller. What does not vary is the structure: two promises, a third from your installer, and a paper trail that decides any claim.
The short answer: two warranties, one document
Ask what a panel warranty covers and the honest answer is a table, not a year count. The headline figure on a brochure, usually 25 years, almost always describes the performance term, the longer of the two maker promises. The product term is often shorter, and the installer workmanship term is shorter still and comes from a different company entirely. Read the three rows below against the quote in your hand before you read anything else on this page.
Three documents, three clocks. The product and performance promises are printed on the same certificate from the panel maker; the workmanship promise is in the installer's contract. Keep all three in one file, with the datasheet, the commissioning report, and the monitoring record. A claim is decided by paper, and this is the paper it is decided by.
| Promise | What it covers | Who stands behind it | What to check first |
|---|---|---|---|
| Product, also called equipment or materials | Defects in the panel itself: bad cells, delamination, a failed junction box, frame or glass faults | The panel manufacturer | The year count, and whether labour to remove and refit the panel is included |
| Performance, also called power output | Output falling below a stated schedule as the panel ages | The panel manufacturer | The year-one floor, the annual rate after it, and the floor at year 25 |
| Workmanship | The installation: wiring, mounting, and the roof penetrations | Your installer, not the maker | The year count, and what happens to it if the installer closes |
The product warranty: what counts as a defect
The product warranty covers the panel as a manufactured object. A cell that was faulty from the factory, a junction box that fails, a laminate that separates, a frame that corrodes: these are defects in materials and workmanship, and the maker repairs or replaces the panel. REC's Alpha Pure-RX terms, read for this page, put the product term at 20 years, and the maker's ProTrust package extends it to 25 years when the panel is installed by an REC Certified Solar Professional and registered with REC.
What the product warranty does not cover is just as important, and the exclusions are where owners get surprised. Damage caused during installation belongs to the installer, not the maker. Damage from a storm beyond the panel's rated load, from misuse, or from a modification the maker did not approve is excluded. And the roof underneath the panel is a separate question with a separate document: whether solar voids a roof warranty depends on the shingle or tile maker's own terms, which the roof warranty guide reads clause by clause.
The remedy is usually repair or replacement of the panel, and the document names which. One cost is commonly left out of the standard terms: the labour to take a faulty panel off the roof and fit the replacement. REC's standard terms carry no labour warranty; the ProTrust package adds one, up to 25 years on residential systems up to 25 kW. If your document is silent on labour, assume you pay it, and price that into the value of a longer product term.
The performance warranty: the floor under your output
The performance warranty is a schedule, not a single number. It states a floor in year one, an annual rate of decline after that, and a floor at the end of the term, and the panel is warranted to stay above the schedule at every point. REC's Alpha Pure-RX schedule, read for this page, is 98 percent of nameplate power in year one, then no more than 0.25 percent of decline a year for 24 years, reaching at least 92 percent in year 25. The arithmetic checks: 98 minus 24 times 0.25 is 92.
Hold that schedule against what panels actually do in the field. The National Renewable Energy Laboratory's analytical review of some 2,000 measured degradation rates found a median fade of about 0.5 percent of output a year for crystalline silicon panels. Compounded, that median path leaves about 88.7 percent of first-year output at year 25. REC's warranted floor of 92 percent sits above the field median, which is the point: a maker that warrants a 0.25 percent annual rate is guaranteeing a slower fade than the typical panel shows. A panel whose warranted rate matches the field median has its floor below the median path instead, because a guarantee is written for the tail of the distribution, not the middle. Either way, the floor is a promise about the worst case you are protected against, not a forecast of what your panels will do.
A claim under this warranty is measured, not argued. Output is tested under standard test conditions, by the maker or an appointed party, and compared with the floor for that year of the system's life. Your side of that conversation is the production record: monthly figures from commissioning, the commissioning report itself, and the datasheet with its stated first-year and annual rates. The maintenance routine is how that record gets kept; a system with eight years of records can prove a fade problem, and a system with none can only assert one.
| Year | REC Alpha Pure-RX warranted floor | Field median path, NREL 0.5 percent a year |
|---|---|---|
| 1 | 98 percent | 100 percent |
| 10 | 95.75 percent | 95.6 percent |
| 25 | 92 percent | 88.7 percent |
What varies between models, and the four numbers to compare
Warranty terms vary by model, by market, and by the route the panel reached your roof. REC's own line shows the pattern: the same panel carries 20 years of product cover as standard and 25 years through ProTrust, and ProTrust itself is conditional on a certified installer and registration with REC. The model code on the quote decides the warranty, and the headline on the brochure does not. Two quotes for the same roof can carry panels with the same 25-year performance headline and product terms years apart.
Compare quotes on four numbers, all of which live on the datasheet or the warranty certificate. Write them down for each model on each quote, and the comparison writes itself.
No single number settles it. A long product term with a low year-25 floor and a short product term with a high floor are different bargains, and the right one depends on whether you value defect cover or output cover more. What settles it is the four numbers side by side, for the exact models on your quotes.
| Number | Where to find it | How to use it |
|---|---|---|
| Product warranty years | Warranty certificate | Longer is better, but check whether labour to remove and refit is included |
| Performance warranty years | Warranty certificate | 25 years is the common term; a shorter term is a reason to ask why |
| Year-25 output floor | Datasheet and certificate | Higher is better; compare the floor, not the headline year |
| First-year and annual degradation | Datasheet | Lower is better; REC warrants 0.25 percent a year after a 98 percent first year |
Making a claim: the paper trail that decides it
A claim starts with noticing the problem, and monitoring is where most owners notice it first: one panel or one string dropping against its neighbours, or a fault code that repeats. The claim itself is a sequence, and each step has a document attached to it.
Report promptly once you find a fault. Most documents set a window for reporting once a defect is found, and a fault left unreported for a season is harder to claim than one reported the week it appeared. That is the second reason the maintenance file matters: documented inspections and prompt, written fault reports are how you show you met your part of the bargain.
- Note the date and the evidence: the monitoring record showing the drop, and any fault code the inverter reports.
- Call the installer first, in writing: many makers route claims through the installer who fitted the system, and the installer is also the party who can test whether the fault is the panel, the wiring, or the inverter.
- Expect measurement: the maker tests output under standard test conditions and compares it with the floor for that year of the system's life.
- Keep the remedy in writing: repair, replacement, or a payment, as the document states, with who pays the labour named.
What shrinks or ends cover: read the exclusions before you sign
Three conditions cut cover short more often than any others. An unapproved modification to the panel or the system, a repair by someone the maker did not authorise, and an installation that does not meet the conditions of an extended package: REC's ProTrust terms, for example, require a certified installer and registration, and a system that misses either step falls back to the standard terms. Read the conditions on your own certificate before the installers leave, not after a fault appears.
Maintenance conditions are the quieter version of the same rule. Warranties commonly require the owner to keep the system in reasonable order and to report faults promptly, and the maintenance guide's answer to the obvious question is that documented inspections and prompt written reports are how you show you met it. What skipping maintenance reliably does, warranty aside, is let a small fault run unnoticed for a season. The maintenance routine and its checklist are the practical form of that obligation.
Selling the house is the last place the document matters. Whether the warranty transfers to a buyer, and whether it needs notice or a new registration, is written in the certificate, and the answer varies. Check it before you list, and hand the warranty file to the buyer with the house papers. The lifespan guide covers what a buyer should ask about a system already on the roof.
An 8 kW system, two different floors
Take an 8 kW system in Arizona, inside this site's recorded planning range of 1,550 to 1,750 kilowatt-hours per kilowatt per year. At the 1,650 midpoint, first-year production is 8 times 1,650, or 13,200 kilowatt-hours. On REC's warranted schedule, year one runs at 98 percent, about 12,936 kilowatt-hours, and year 25 at 92 percent, about 12,144 kilowatt-hours; across all 25 years the system produces about 313,500 kilowatt-hours. Now take a second, hypothetical schedule with the same 98 percent first year but a floor of 85 percent at year 25, falling evenly: year 25 gives about 11,220 kilowatt-hours, and the 25-year total is about 301,950 kilowatt-hours. The difference is 924 kilowatt-hours in year 25 alone, and about 11,550 kilowatt-hours across the 25 years. Per panel the same gap reads smaller and is easier to feel: a 400-watt panel holds 368 watts at a 92 percent floor and 340 watts at an 85 percent floor, 28 watts per panel, or 560 watts across 20 panels. That is what a seven-point difference in the year-25 floor is worth, and it is the number to carry into the quote comparison.
Warranty paperwork to keep
- Get the panel's warranty certificate and datasheet in writing before you sign, for the exact model code on the quote.
- Write down the four numbers: product years, performance years, the year-25 output floor, and the first-year and annual degradation rates.
- Check whether labour to remove and refit a panel is covered, and for how long.
- Check whether extended terms need a certified installer and registration, and confirm both are in place.
- File the commissioning report with your monitoring records; they are the evidence a claim is measured against.
- Before selling, read the transfer clause and hand the warranty file to the buyer.
Panel warranty questions
Is a 25-year warranty the same as a 25-year panel life?
No. The warranty is a floor on defects and output, not a lifespan. Panels typically keep producing past 25 years: the Department of Energy puts panel life at about 25 to 30 years, and the NREL median fade leaves about 88.7 percent of first-year output at year 25. The lifespan guide runs that rate forward year by year.
What is the difference between the product and performance warranties?
The product warranty covers the panel itself, defects in materials and workmanship. The performance warranty covers what the panel does, guaranteeing output stays above a stated schedule as it ages. One can be strong while the other is short, which is why the certificate has to be read as two promises, not one.
Does the warranty pay for the labour to swap a faulty panel?
Often not in the standard terms. REC's standard terms carry no labour warranty; its ProTrust package adds one, up to 25 years on residential systems up to 25 kW, when the panel is installed by a certified professional and registered. If your document is silent on labour, assume you pay it.
What happens to my panel warranty if the installer goes out of business?
The maker's product and performance warranties are with the manufacturer, so they stand without the installer. The workmanship warranty is the one at risk, because it belongs to the installer. The company closure guide walks through who services the system next.
Does the warranty transfer when I sell the house?
It depends on the document. Some warranties transfer automatically, some need notice to the maker, and some need a new registration. Read the transfer clause before you list, and hand the warranty file to the buyer with the house papers.
My panel stopped producing. What do I do first?
Check monitoring for the date and the scale of the drop, note any fault code, and contact the installer in writing. Keep the monitoring record, the commissioning report, and the datasheet together: they are the evidence a claim is measured against. The maintenance routine shows what to record and when.
Sources and verification
- REC Group, REC Alpha Pure-RX solar panels: Read November 8, 2026: 20-year product warranty, 25-year performance warranty, at least 92 percent of nameplate power in year 25, 0.25 percent warranted annual degradation, 470 W, 22.6 percent efficiency, 226 watts per square metre; REC ProTrust adds a 25-year product, performance and labour warranty for residential systems up to 25 kW when installed by an REC Certified Solar Professional and registered. Checked November 8, 2026.
- EnergySage, Solar Panels: Browse and Compare Products: Read November 8, 2026: two warranty types, equipment (materials) and performance; most panels 15 to 20 percent efficient with some above 20 percent; monocrystalline panels higher efficiency than polycrystalline at a higher price; compare systems on dollars per watt. Checked November 8, 2026.
- National Renewable Energy Laboratory (NREL), Photovoltaic Degradation Rates: An Analytical Review (Jordan and Kurtz): Checked October 21, 2026: the review gathered some 2,000 measured degradation rates and found a median of about 0.5 percent per year for crystalline silicon. All year-by-year output figures in this guide are compounded from the median rate and were recomputed for this page. The review PDF could not be re-fetched during this run; the figures are the site's verified record from October 21, 2026. Checked October 21, 2026.
- U.S. Department of Energy, Homeowner's Guide to Solar: Read November 8, 2026: the Department of Energy's starting guide for homeowners, linking the step-by-step consumer process, installer choice, and roof replacement timing. Page updated May 15, 2026. Checked November 8, 2026.
- SolarRoost state planning data (states.json): Recorded planning range for Arizona of 1,550 to 1,750 kilowatt-hours per kilowatt per year, used for the worked example at its 1,650 midpoint. Planning factors only, labelled as examples wherever this site uses them. Checked October 4, 2026.
Warranty figures in this guide are from the REC Alpha Pure-RX terms read November 8, 2026, and the NREL degradation review checked October 21, 2026. Other makers and models set different terms, and terms vary by market: the warranty certificate for the exact model on your quote is the only version that binds the seller. Production figures are this site's recorded planning factors, labelled as examples.