System design and production

How to choose solar panels: efficiency, warranty and the numbers that matter

Choosing a solar panel is not choosing a brand. It is reading five numbers on a datasheet and matching them to your roof: wattage, efficiency, temperature coefficient, warranty, and cost per watt. Each number answers a different question, and the one that matters is the one your roof asks. A small roof asks about efficiency. A hot roof asks about the temperature coefficient. A tight budget asks about cost per watt. Get the questions in the wrong order and you pay a premium for a number that buys you nothing.

This guide uses published figures as its illustrations: REC's Alpha Pure-RX panel at 470 watts, 22.6 percent efficiency, and 226 watts per square metre, read from the maker's own page for this guide, and the Department of Energy's Q1 2025 residential benchmark of $2.95 per watt DC for an 8 kW system. No page here ranks brands or recommends a panel; the method is the point, and the worked examples carry their inputs on the page so you can rerun them on your own quotes.

The short answer: the five-number decision table

Start here and stay here until the table is filled in for every panel on your quotes. A panel choice made from a brochure headline, usually the wattage, is a choice made from one number out of five.

Read the table down the last column. Wattage decides the panel count. Efficiency decides whether the array fits. The temperature coefficient decides how much a hot afternoon costs. The warranty decides what the panel is worth in year 25. Cost per watt decides whether any of the other four is worth paying for.

NumberWhat it tells youWhere to find itWhen it decides the purchase
Wattage (W)Power from one panel under test conditionsDatasheet, under the model codeHow many panels make your kilowatts
Efficiency (%)Power per square metre of roofDatasheetWhen roof space is the limit
Temperature coefficient (% per degree C)Output lost as the panel heats upDatasheetOn hot roofs and in hot climates
Warranty (product and performance)Defect cover and the year-25 output floorWarranty certificateWhen two panels cost the same per watt
Cost per watt ($/W)What each watt of capacity costsThe quote, against the DOE benchmarkEvery time, before anything else

Wattage and efficiency: the same kilowatts, fewer panels

Wattage is the power one panel produces under standard test conditions: 1,000 watts of sunlight per square metre at a 25 degree cell temperature. Efficiency is how much of that sunlight the panel turns into electricity, which is the same as power per square metre of panel. The two numbers are linked by the panel's area: a 400-watt panel at 20 percent efficiency and a 440-watt panel at 22 percent efficiency can be the same physical size, and the higher wattage buys fewer panels, not a smaller system. The kilowatts your house needs come from your use and your location, not from the panel label; the sizing guide works that number out from your bill.

Most residential panels today are monocrystalline silicon, cut from a single crystal, and EnergySage puts most panels at 15 to 20 percent efficiency, with some models above 20 percent. Polycrystalline panels, made from melted fragments rather than a single crystal, usually run lower efficiency at a lower price. REC's Alpha Pure-RX, read for this guide, sits at the high end of the current residential market: 470 watts, 22.6 percent efficiency, and a power density of 226 watts per square metre, which is the number that matters when the roof is short of space.

Efficiency pays only when the roof is the limit. On a roof with room to spare, a lower-efficiency panel at a lower cost per watt buys the same kilowatts for less money, and the extra panels are the cheaper answer. Pay for efficiency when the array does not fit any other way; everywhere else, judge the panel on cost per watt and let the roof area decide the count.

The temperature coefficient: the number hot roofs should check first

Panels are rated at a cell temperature of 25 degrees Celsius, and a panel on a dark roof in July runs far hotter than that. The temperature coefficient states how much power the panel loses for each degree above 25, in percent per degree Celsius, and a smaller magnitude is better. It is printed on the datasheet, usually as the power temperature coefficient, and it is the number that separates two panels with identical wattage on a hot roof.

Take two labelled, hypothetical coefficients and run them through a hot afternoon. A panel whose cells reach 65 degrees is 40 degrees above its test point. At a coefficient of minus 0.30 percent per degree, it loses 12 percent of its rated power; at minus 0.40 percent per degree it loses 16 percent. That four-point gap is the difference between the two panels at the hottest hour of the day, every hot day, for the life of the system. The coefficients here are illustrations with stated inputs, not any model's rating: read the real figure from the datasheet of the exact model on your quote. REC's own page claims a leading temperature coefficient for its heterojunction cells, which is the kind of claim the datasheet either supports or does not.

The coefficient matters most where roofs run hot: dark shingles, low airflow under the array, and climates with long hot summers. It matters least in cool climates with mild summers, where the panel rarely strays far from its test temperature. Either way it is a free comparison: two datasheets, two numbers, no sales visit required.

STC vs NMOT: the second wattage on the datasheet

Every panel carries two wattages, and most quotes print only the bigger one. The headline number, 470 watts for the REC Alpha Pure-RX, is the power at standard test conditions: 1,000 watts of sunlight per square metre, a cell temperature of 25 degrees, and the AM 1.5 spectrum. Those are lab conditions, chosen so every maker tests the same way, and they are the right number for comparing one panel against another. They are not the power your roof sees on a warm afternoon.

The second number sits further down the same datasheet, under NMOT, nominal module operating temperature. NMOT tests at 800 watts per square metre, 20 degrees ambient air, and a 1 metre per second breeze, which leaves the cells at about 44 degrees for this panel. That is a bright, warm day, not a lab, and the power it prints is the realistic warm-weather figure. For the 470-watt Pure-RX, the NMOT power is 358 watts. That is 112 watts less than the headline, or 76 percent of the nameplate, and the gap is not a defect. It is the physics of weaker light on hotter cells, printed on the same page.

You can check the gap with the two numbers already on the datasheet. The light alone accounts for most of it: 800 watts per square metre is 80 percent of the 1,000-watt test, so 470 watts times 0.80 is 376 watts before temperature. The cells at NMOT run at 44 degrees, 19 degrees above the 25-degree test point, and this panel loses 0.24 percent per degree, so 19 times 0.24 is about 4.6 percent. Take 376 watts times 0.954, and you get about 359 watts, within a watt of the 358 watts REC prints. The arithmetic closes because both test points come from the same datasheet. If a quote's production model cannot be traced back to numbers like these, ask which test point it used.

Use the NMOT figure the way you use the temperature coefficient: as a tie-breaker between two panels with the same headline wattage. Two 470-watt panels can have different NMOT powers if one runs cooler or holds its voltage better in heat, and the one with the higher NMOT power will produce more on the afternoons that matter. Run the same check at system scale before you sign. Seventeen 470-watt panels make an 8 kW system on paper, since 17 times 470 is 7,990 watts, but under NMOT conditions those same panels are rated at 17 times 358, or 6,086 watts, about 6.1 kW. That is not the system's annual production, which depends on hours of sun and the planning factor in this guide's worked example, but it is the honest instantaneous figure for a warm, bright hour, and it is the number to hold against any production estimate that looks too good.

REC Alpha Pure-RX datasheet, April 2025, read November 10, 2026.
Test pointSunlightCell temperature470 W panel power
STC (standard test conditions)1,000 W per sq m25 degrees C470 W
NMOT (nominal module operating temperature)800 W per sq m20 degrees C ambient, cells about 44 degrees C358 W

Warranty and degradation: the panel's second price

A panel has two warranties, and the choosing decision needs both numbers. The product warranty covers defects in the panel itself; the performance warranty guarantees output stays above a stated schedule as the panel ages. REC's Alpha Pure-RX terms, read for this guide, promise 20 years of product cover and 25 years of performance cover, with at least 92 percent of nameplate power in year 25 after a 98 percent first year and no more than 0.25 percent of decline a year. The warranty guide reads both promises in full, including what a claim needs and what labour is left out.

The field gives you the comparison line. The National Renewable Energy Laboratory's review of some 2,000 measured degradation rates found a median fade of about 0.5 percent of output a year, which compounded leaves about 88.7 percent of first-year output at year 25. A panel warranted at 0.25 percent a year guarantees a slower fade than the typical panel shows; a panel warranted at the median rate guarantees the typical fade and no better. The year-25 floor is the number to compare between quotes, not the headline year.

Extended terms carry conditions, and the conditions are part of the price. REC's ProTrust package, which extends product cover to 25 years and adds a labour warranty, applies only when the panel is installed by an REC Certified Solar Professional and registered with REC. A quote that prices the extended terms without naming the certified installer or the registration step is pricing a promise the buyer may not receive.

Cost per watt: the test that keeps the premium honest

Cost per watt is the only number that prices the panel against the market. The Department of Energy's Q1 2025 residential benchmark puts an 8 kW rooftop system at $2.95 per watt DC, or $23,600 for the system, in 2024 dollars, checked October 30, 2026. That is a modelled comparison line, not a quote, and the cost guide shows how to run it against a real quote line by line. A panel premium is priced the same way: as dollars per watt above the line.

Run the premium test with the numbers on the page. A quote priced $0.25 per watt above the benchmark on an 8 kW system costs $2,000 more, and that $2,000 has to buy something measurable: more watts from the same roof, a higher year-25 floor, or longer product cover. If the premium buys none of the three, it is paying for a brand name, and the cheaper panel at the same cost per watt is the better buy. The figures in this paragraph are labelled hypotheticals, a $0.25 premium on an 8 kW system, so you can rerun the test with the premium on your own quote.

No federal residential credit appears in any figure on this page. The credit was 30 percent for property installed from 2022 through December 31, 2025, and it is not available for property placed in service after that date, so a premium justified by a credit that no longer applies is a premium with no justification. State and utility incentives are a separate question, verified through DSIRE and the utility tariff, never printed as guaranteed values.

The shortlist: five questions to ask every installer

Take this list to the sales visit, and do not sign until every question has a written answer. The questions are short because the answers should be: a model code, five numbers, and a price per watt.

An installer who answers all five in writing has given you a comparable quote. One who answers with a monthly payment instead of a price has given you a sales pitch, and the quote red flags guide works through those patterns in full.

  1. Name the exact model code on the quote, and hand me its datasheet and warranty certificate.
  2. Show me the five numbers for that model: wattage, efficiency, temperature coefficient, warranty years and floor, and cost per watt.
  3. Price the premium per watt: how much above the DOE benchmark is the panel line, and what does it buy?
  4. Confirm any extended warranty conditions: certified installer, registration, and who files it.
  5. Tell me what happens to the warranty if your company closes, in writing.

One roof, two panels: the space test

Take a usable roof area of 40 square metres and two panels. REC's Alpha Pure-RX, at 226 watts per square metre, fits 40 times 226, or 9,040 watts, about 9.0 kW, on that roof. A panel at 20 percent efficiency, about 200 watts per square metre, fits 40 times 200, or 8,000 watts. The difference is 1,040 watts, about 1.0 kW, which at this site's planning factor of 1,650 kilowatt-hours per kilowatt per year is about 1,716 kilowatt-hours a year, every year, for the life of the system. The panel count tells the same story from the other side: 8 kW needs 20 panels at 400 watts, or 17 panels at 470 watts, which is 7,990 watts. Now price it: a premium of $0.25 per watt on an 8 kW system is $2,000, so the question the buyer has to answer is whether about 1,716 kilowatt-hours a year from the same roof is worth $2,000. That is the whole panel decision, reduced to one roof, two numbers, and a price.

Panel shortlist to keep

  • Get the exact model code, datasheet, and warranty certificate for every panel on a quote.
  • Write down the five numbers for each model: wattage, efficiency, temperature coefficient, warranty years and floor, and cost per watt.
  • Measure the usable roof area and run the watts-per-square-metre test before paying for efficiency.
  • Price any premium per watt against the DOE $2.95 benchmark, and name what it buys.
  • Confirm certified-installer and registration conditions for any extended warranty.
  • Keep the datasheet and warranty certificate with the commissioning report.
  • Find the NMOT power on the datasheet and compare it across panels, not just the STC wattage.

Choosing solar panels, answered

Do I need the most efficient panel available?

Only if the roof is the limit. On a roof with room to spare, a lower-efficiency panel at a lower cost per watt buys the same kilowatts for less money, and the extra panels are the cheaper answer.

What efficiency is good for a residential panel?

EnergySage puts most panels at 15 to 20 percent efficiency, with some models above 20 percent. REC's Alpha Pure-RX, at 22.6 percent, sits at the high end of the current residential market. Above 20 percent is strong; below 15 percent is at the low end of what is currently sold, and worth asking about.

Are more watts per panel always better?

No. Higher wattage cuts the same kilowatts into fewer panels, but the roof area the array needs depends on efficiency, not wattage. The sizing guide sets the kilowatts from your bill; the panel choice sets how many pieces they come in.

How much extra should I pay for a premium panel?

Run the cost-per-watt test against the DOE benchmark of $2.95 per watt. A $0.25 per watt premium on an 8 kW system is $2,000, and it has to buy measurable output, a higher year-25 floor, or longer product cover. If it buys none of the three, it is paying for a brand name.

Monocrystalline or polycrystalline?

Monocrystalline panels are the premium product, made from a single crystal, with higher efficiencies. Polycrystalline panels are made from melted fragments and usually run lower efficiency at a lower price. Compare the five numbers on the datasheet, not the cell label: a good polycrystalline panel can beat a poor monocrystalline one on cost per watt.

Should the panel brand decide which installer I pick?

No. Vet the installer separately, on licence, reviews, and the contract, and read the quote red flags guide before you sign. One caution: extended warranty terms can require a certified installer, so check that the installer you pick qualifies for the terms you are paying for.

Why does my system produce less than its nameplate kilowatts on a sunny day?

Because the nameplate is a lab figure. A 470-watt panel is rated at standard test conditions, 1,000 watts per square metre and 25-degree cells. On a warm, bright day the same panel is rated at its NMOT power, 358 watts for the REC Alpha Pure-RX, because the light is weaker and the cells run near 44 degrees. An 8 kW system of 17 such panels is rated at about 6.1 kW under those conditions. That gap is normal, and it is why production estimates are built from planning factors and roof-specific modelling, not from multiplying the nameplate by hours of sun.

Sources and verification

  • REC Group, REC Alpha Pure-RX datasheet (April 2025): Read November 10, 2026: 470 W at STC (AM 1.5, 1,000 W/m2, 25 degrees C cell) and 358 W at NMOT (AM 1.5, 800 W/m2, 20 degrees C ambient, 1 m/s wind; nominal module operating temperature 44 degrees C, plus or minus 2); temperature coefficient of PMAX -0.24 percent per degree C; 22.6 percent efficiency; 20-year product and 25-year performance warranties. Checked November 10, 2026.
  • EnergySage, Solar Panels: Browse and Compare Products: Read November 8, 2026: two warranty types, equipment (materials) and performance; most panels 15 to 20 percent efficient with some above 20 percent; monocrystalline panels higher efficiency than polycrystalline at a higher price; compare systems on dollars per watt. Checked November 8, 2026.
  • REC Group, REC Alpha Pure-RX solar panels: Read November 8, 2026: 470 W, 22.6 percent efficiency, 226 watts per square metre, heterojunction cell technology with a leading temperature coefficient; 20-year product warranty, 25-year performance warranty, at least 92 percent of nameplate power in year 25, 0.25 percent warranted annual degradation; REC ProTrust requires an REC Certified Solar Professional and registration. Checked November 8, 2026.
  • U.S. Department of Energy, Solar Photovoltaic System Cost Benchmarks (Q1 2025): Checked October 30, 2026: Table 2 modelled market price of $2.95 per watt DC for the 8 kW residential PV-only system, 2024 dollars, or $23,600 for 8 kW. A comparison line, never presented as a quote or local price survey. Checked October 30, 2026.
  • National Renewable Energy Laboratory (NREL), Photovoltaic Degradation Rates: An Analytical Review (Jordan and Kurtz): Checked October 21, 2026: the review gathered some 2,000 measured degradation rates and found a median of about 0.5 percent per year for crystalline silicon. All year-by-year output figures in this guide are compounded from the median rate and were recomputed for this page. The review PDF could not be re-fetched during this run; the figures are the site's verified record from October 21, 2026. Checked October 21, 2026.
  • U.S. Department of Energy, Homeowner's Guide to Solar: Read November 8, 2026: the Department of Energy's starting guide for homeowners, linking the step-by-step consumer process, installer choice, and roof replacement timing. Page updated May 15, 2026. Checked November 8, 2026.
  • SolarRoost state planning data (states.json): Recorded planning range for Arizona of 1,550 to 1,750 kilowatt-hours per kilowatt per year, used for the worked example at its 1,650 midpoint. Planning factors only, labelled as examples wherever this site uses them. Checked October 4, 2026.

Panel figures are from the REC Alpha Pure-RX page and the EnergySage buyer's guide, both read November 8, 2026, and the DOE Q1 2025 benchmark checked October 30, 2026. Temperature-coefficient and premium figures in the illustrations are labelled hypotheticals, not any model's rating; read the coefficient and the premium from the datasheet and the quote for the exact model you are buying. No federal residential credit appears in any figure. Production figures are this site's recorded planning factors, labelled as examples. STC and NMOT figures are from the REC Alpha Pure-RX datasheet (April 2025), read November 10, 2026; the NMOT arithmetic on the page is recomputed from the datasheet's own figures.